|
Deckma OMD-7 MKII Monitor for Industrial & Offshore Applications (Oil-in-Water/ Solids-in-Water / Water Turbidity Monitor) Tested to Requirements of IMO Resolution MEPC.60 (33) The OMD-7 Monitor was designed and developed by Deckma Hamburg GmbH, specifically for industrial & offshore applications. The OMD-7 is the result of intense research and 20+ years of experience in continuous Oil-in-Water Monitoring. Deckma's worldwide recognition and reputation in this field is second to none. The OMD-7 MKII is the first Industrial Oil-in-Water Monitor capable of distinguishing between the different characteristics of Oil particles, Solid particles and Water Turbidity on a continuous basis. The OMD-7 is comprised of a compact Measuring Cell, Monitor (with integral Computer Unit), Monochrome Alphanumeric Display and a proven Sample Conditioning Unit (SCU) for sample processing: • The oily sample is directed continuously through the Measuring Cell to enable the detection of any oil, solids or turbidity that is present. • The Monitor displays all three characteristics (Oil, Solid and Turbidity) of the discharge liquid. • The Sample Conditioning Unit works mechanically without adding any chemicals or detergents. The Measuring Principle of the OMD-7 MKII is based on the internationally known “Scattered Light Principle”: • The measurement is based on the fact that oil droplets and solid particles in the sample water scatter light (due to the system arrangement in the measuring cell). The use of three different wave lengths for the incident light and the angular arrangement of the receivers allow the monitoring of typical scattered light distribution patterns of oil droplets and solids. • The intensity of scattered light from the sample glass tube is received by the solid state detectors. After amplification the signal is converted into digital data. A microprocessor controls data acquisition, data integrity and light source intensities. The data is sent to the electronic unit for further processing. The oil content can now be calculated independently from the solids content as well as the sample turbidity. All calculated values are displayed on a LCD display. • Parallel to the above measurements, the projected light signals are monitored and in the absence of the light-beams, the alarm circuits are activated (“Monitor Fault Alarm”). For more information, contact: Jennifer Ory at (504) 733-5824 or Email: jennifer.ory@mackaymarine.com NOTE: Mackay Marine is a Deckma-Certified Calibration Service Provider. Contact Jennifer Orly (above) or, Email: calibrations@mackaymarine.com  Product Datasheet
|
|
|
|||||||||||||||||||||||||||||||
